Vibration instruments and tools for all applications!

---

IMPORTANT! ONLY SPARE PARTS AVAILABLE

A large step towards a well planned machine maintenance.

With X-Viber, measurements are fast and easy, because of the Route function. Vibration level, temperature and RPM is measured with the same instrument, which simplifies the measurements.

Balancing, Spectrum measurement and Analyzing are also possible with X-Viber. For balancing, a balancing kit is available.

Features: Route via X-Trend software, Total Level, Envelope. Bearing Condition Value, Analysis, Temperature, Speed, Off Route Spectrum

Single Plane Balancing, Spectrum in Route (option).

Starter of condition based maintenance by trending measurement in PC software

PC software Trend View™ included, Can be used as an Analyzer (fault displaying highest peaks from the FFT),Headphones for bearing noice detection, Balancing with a new 3-point method, Bearing Condition, Built-in temperature sensor, Selectable alarms, Battery charger included, Dust and waterproof, for rough use (IP 65).

Is designed to be very easy to handle, with high reliability and quality to a low cost!These instrument is especially designed for service technicians, operators and overall simple tests, like fault in machines defined by to high vibration levels or to high bearing condition value.  

Is an analog vibration measuring instrument for control and measurement of the mechanical vibration and bearing condition. A flexible instrument that fits in every maintenance engineer's pocket.

Features:

•  Total level (mm/s RMS) and bearing condition.

•  Easy to use, start and measure.

•  Dust-and waterproof, for use under tough conditions (IP 65).

•  Interchangeable accelerometer with cable

•  Selectable frequency ranges.

•  Analog instruments with high measurement accuracy and reliability.

•  Provides a good security in assessing when a piece of equipment need to be addressed.

VIBER X 1 ™ is a completely analog instruments and the further development of the well-proven Viber (A). Dense built-in charger, selectable frequency ranges and interchangeable accelerometer (BNC connector), and just as easy and reliable as its predecessor. Measure very accurate right down to the 2Hz. with the push of a button is changed frequency range (2Hz-1000 Hz, 10-1000 Hz, 2Hz-givarmax, 10 Hz-givarmax). Interchangeable accelerometer and cable provides economy and safety because it can easily be replace if something breaks and that you do not need to be close to rotating parts. Clear LED indication displays the frequency range that is selected. Charger, manual, accelerometer with 1 m cable and flat magnet and soft bag with shoulder strap and belt clip included. 2 year warranty included with the possibility of extension up to 6 years.

Instrument has the following features: Accurate measurements for 4 selectable frequency ranges. Real-time measurement of the total vibration level and the Bearing Condition (BC), shown simultaneously. The largest amplitude peak frequency in RPM or Hz in main screen display. Measurement units and measurement presentation may be selected by the user from the following list:

g-value = (RMS, Peak or Peak-Peak)

a = m/s² (RMS, Peak or Peak-Peak)

V = mm/sec (RMS, Peak or Peak-Peak)

V = inch/sec (RMS, Peak or Peak-Peak)

D = mills (RMS, Peak or Peak-Peak)

D = µm (RMS, Peak or Peak-Peak)

Bearing Condition measurements. Bar indicator shows measurement stability. Large dynamic range of the vibration signal (up to 50 g).

Low power consumption. Clear vibration, temperature and danger alarms by red and yellow colour LED’s. Easy to understand and operate. Advanced technology with DSP processor. Display with backlight. Several languages are available. Adjustable Auto-shut off for energy saving. Dust and waterproof, for rough use (IP 65).

Designed for maintenance and repair teams and operators personell that needs a reliable, fast and easy to use tool for basic condition monitoring in rough conditions. Now with trend function / software.

Real-time measurements of the total vibration level and the Bearing Condition (BC), shown simultaneously

Bar indicator displays measurement stability

Fast and easy fault analysis displaying the five largest amplitude peaks frequency in RPM or Hz on main screen display

Low power consumption

Overflow alarm limits are clearly displayed with a yellow and red LED indicator

Several languages are available

Dust and waterproof, for rough use (IP65)

Pc-software for Trend View

Up to 100 measurements can be saved.

• Predict equipment failures before they occur
• Troubleshoot equipments and discover the cause of problem
• Inspect equipment during maintenance to confirm a successful repair
• Ensure correct installation of equipments
• Easy to operate by logic functions, saves time to get started
• Flexible with many functions
• Ability to choose your own language
• Bright high-resolution display makes it easy to see perfect results even in bright conditions
• Record wave time signal, up to 5 minutes
• Quickly charge the battery up to 80% within two hours even in the car
• 32 GB of memory that guarantees enough space for your data
• Rugged and tight (IP 65)
• Best price-performance ratio

VIBER X4™ is designed to work together with SpectraPro, PC software for advanced vibration analysis
• Create routes and set alarm levels
• Simple database structure with templates and pictures
• Large bearing database (over 9000 pcs) where defect frequencies can be calculated and automatically analysed
• Quick view, store your own array of windows for fast viewing
• Waterfall, last 5 spectra or choose your own
• Automatic reports, generate probable fault causes and several reports with just a a click of a button

 With the animation program Vibshape you will ”understand”

how a machine vibrates and what measures should be taken.VibShape™

With the animation program Vibshape you will ”understand”

how a machine vibrates and what measures should be taken.

Vibshape has functions for drawing of cubes, boxes and cylinders

Vibshape shows all the pictures in radial projection

Vibshape can move, copy or delete junctions

With the manual input the program is suitable for all instruments

that can measure vibration and angle

Measuring data can be entered while the model is vibrating ”live”

The zoom and view angle can easily be changed with the mouse

It is easy to change the mode shape frequency at animation

Automatic max and min deviation for print out or copying

 SpectraPro is functioning as an analysis program for Viber X5 MKIII. Easy Database design with templates and machine pictures. Calculation of machine fault frequencies including a bearing data base, belt drives, gear boxes and electrical motors.

Several shaft speed tools at evaluation with measured,  alculated and set in database. All fault frequency calculations are based on the selected speed. When the speed is changed all fault calculations are also changed. SpectraPro has band analysis that helps analyzing the trend of a singular frequency or fault.

SpectraPro has several automatic reports like, Spectrum, Trend and Transfer reports.

Software for VIBER-X3 This software is dedicated to work in conjunctionwith the VIBER-X3 instrument. For every plant, you can create a database, which can have an unlimited number of machines, measurement points and directions. The vibration measurements are stored at the level of the measurement directions and the process measurements are stored at the point level. The machine database downloads the measurings from the X-Viber instrument. Analyzing this information, periodically, you can act proactively, discovering the real causes of the failures.

This software is mainly dedicated to work in conjunction with the X-Viber instrument. For every plant, you can create a database, which can have an unlimited number of machines,  measurement points and directions. 

The vibration measurements are stored at the level of the measurement directions and the process measurements are stored at the point level.  The machine database downloads the measurings from the X-Viber instrument. Analyzing this information, periodically, you can act proactively, discovering the real causes of the failures.

X Tools helps you to import all measurements made by VIBER X5 to PC, look at each individual measurement and analyze it. You can also make a report from one or more measurements.